ECE 320 SIGNALS AND SYSTEMS II
Problem Set 1

Fall 2002

Issued: Monday, August 26, 2002            Due: Wednesday, September 3, 2002


Reading in Oppenheim and Willsky with Nawab
    
8/28/02 --- Sections 1.0-1.4
9/3/02 --- Sections 1.5-1.7


Problem 1.21 in Oppenheim/Willsky/Nawab
Do parts a, b, c, and e using the signal x(t) shown in Figure 1 below, rather than the one in the textbook.


Figure 1: x(t) for Problem 1.21.

Problem 1.22 in Oppenheim/Willsky/Nawab
Do parts a, c, e, and f using the signal x[n] shown in Figure 2 below, rather than the one in the textbook.


Figure 2: x[n] for Problem 1.22.

Note: You may find it helpful to read the Mathematical Review section on page 71 of Oppenheim/Willsky/Nawab before doing the next three questions.

Problem 1.48 in Oppenheim/Willsky/Nawab
Do parts a through e when r0=2 and q0=p/2.

Problem 1.49 in Oppenheim/Willsky/Nawab
Do parts b and c.

Problem 1.50 in Oppenheim/Willsky/Nawab
All parts.

Problem 1.55 in Oppenheim/Willsky/Nawab
All parts.

Matlab Exercises
There are no Matlab exercises assigned this week. If you feel you need to refresh your memory about how to use Matlab, you may want to read through the tutorial in Section 1.1 of the Buck/Daniel/Singer book.

This document was translated from LATEX by HEVEA.